Life Fitness 93T User Manual
Page 152
3-37
Front
Cover
Power
Control
Board
Back
Cover
Mounting
Screws (8)
PCB Mounting
Screws (7)
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Display Board PCB
NONE Special Service Tools Required: NONE
1. Turn the unit power OFF at the switch, and then unplug the line cord at the wall outlet.
2. Remove eight screws from the Back Cover of the Console.
3. Lift off the Front Cover. Disconnect all the Cables and Ribbon Connectors from the PCB Board.
4. Remove eight screws from the PCB, and then remove the PCB. Send the PCB back to Life Fitness.
5. Install new PCB in reverse order. DO NOT over tighten mounting screws.
6. Reconnect the Cables and Ribbon Connectors to the PCB.
7. Install the back cover. DO NOT over tighten screws.
8. Refer to Diagnostics Section to Log Maintenance Repair of the Display Console Control Panel.