How to... replace the heart rate sensors – Life Fitness 93T User Manual
Page 147
Advertising
3-32
Signal Output
Sensor
Ground
Sensor
Sensor
Screws
Note: Clean before
reassembling
using alcohol
Life Fitness Model 97Te, 95Te, 97Ti, 95Ti and 93T Arctic Silver Treadmills
How To... Replace the Heart Rate Sensors
Special Service Tools Required: NONE
1. Turn the unit power OFF at the
switch then unplug the line cord at
the wall outlet.
2. Remove two screws securing the
Heart Rate Sensors.
3. Disconnect the wire (black or
green) from the Ground Sensor and
the wire (red or white) from the
Signal Output Sensor.
4. Discard the old Sensor.
5. Install new sensors in reverse
order, and tighten with screws 5-7
in lbs.
6. Repeat the above steps for the remaining Heart Rate Sensor.
Advertising