Lexmark 9300 Series - Manual (Page 105)

MS
XD SD/M MC CF/M D
PictBr idge
Notes:
• Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see
the camera documentation.
• The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
• If the PictBridge connection is successful, the following appears on the printer display: PictBridge camera
detected. Press to change settings. If any other message appears, see “General error messages”
on page 175.
• Values selected within the menu items are settings used for Pictbridge printing if no explicit selection is made
from the camera.
3 Follow the instructions in the camera documentation to select and print photos.
Note: If the printer is turned off while the camera is connected, you must disconnect and then reconnect the camera.
Printing photos using the computer
Note: If you want to:
• Print photos or images from a Web page, see “Printing photos or images from a Web page” on page 90.
• Use advanced photo-editing options, see “Using the Photo Editor” on page 70.
Printing photos stored on a memory device using Fast Pics
1 Load a stack of photo paper in Tray 1 or one sheet in the small media feeder.
Note: Make sure to load the paper with the glossy or printable side facing down. (If you are not sure which side is
the printable side, see the instructions that came with the paper.)
2 Insert a memory card or flash drive.
The Fast Pics software launches automatically on your computer screen.
The light on the printer blinks to indicate the memory card is being read or transmitting data.
If your flash drive has a light, it blinks to indicate the flash drive is being read or is transmitting data.
3 Wait for the light to stop blinking.
Warning: Do not touch cables, any network adapter, the memory card or flash drive, or the printer in the area
shown while actively printing, reading, or writing from a memory card or flash drive. A loss of data can occur. Also,
do not remove a memory card or flash drive while actively printing, reading, or writing from a memory card or flash
drive.
105