Lexmark 9300 Series - Manual (Page 79)

Load up to Make sure
100 sheets of heavyweight matte paper
50 sheets of photo paper
50 sheets of glossy paper
• The glossy or printable side of the paper faces down. (If you are not
sure which side is the printable side, see the instructions that came
with the paper.)
• The paper guides rest against the left, right, and bottom edges of the
paper.
Note: Photos require more drying time. To prevent smudging or
scratching, avoid touching the printed surface with your fingers or sharp
objects. For best results, remove each printed sheet individually from the
paper exit tray, and allow the prints to dry at least 24 hours before
stacking, displaying, or storing.
100 sheets of letterhead paper • The letterhead side of the paper faces down.
• The top of the letterhead feeds into the printer first.
• The paper guides rest against the left, right, and bottom edges of the
paper.
10 envelopes
• The envelopes are designed for use with inkjet printers.
• The print side of the envelopes faces down with the flap to the left as
shown.
• You load the envelopes in the center of the tray as indicated by the
icon. Load them vertically and all the way to the back of Tray 1.
• You print the envelopes in landscape orientation.
• The paper guides rest against the left, right, and bottom edges of the
envelopes.
• You select the correct envelope size. If the exact envelope size is not
listed, select the next larger size. Set the left and right margins so
that the envelope text will be correctly positioned on the envelope.
Warning: Do not use envelopes that have metal clasps, string ties, or
metal folding bars.
Notes:
• Do not load envelopes with holes, perforations, cutouts, or deep
embossing.
• Do not use envelopes that have exposed flap adhesive.
• Envelopes require more drying time. Remove each envelope as it
exits, and allow it to dry to avoid ink smudging.
79