Lexmark 9300 Series - Manual (Page 58)

Use this To
Caller ID Pattern Choose from one of the following patterns available based on the country or region you
selected during initial setup. If phones in your country or region use two detection patterns,
call your telecommunications company to determine their subscribed pattern.
• Pattern 1 (FSK)
• Pattern 2 (DTMF)
Using the Fax Printing submenu
Use this To
If Too Big Choose from values of Fit to Page or Use Two Pages.
Fax Footer Choose to print identifying information at the bottom of each page of a fax.
2-Sided Print Choose to print faxes on one or both sides of a sheet of paper.
Paper Handling Change settings related to the loading of paper in the paper tray or trays. For more information, see
“Using the Paper Handling submenu” on page 54.
Using the Dialing and Sending submenu
Use this To
Your Fax Number Enter your fax number using the keypad. This number is shown on the cover page of outgoing
faxes.
Your Fax Name Enter the name of the printer using the keypad. This name is shown on the cover page of
outgoing faxes.
Cover Page Choose whether or not to send a cover page with the outgoing fax.
Color Choose from values of Black & White or Color.
Quality Choose from values of Standard, Fine, Superfine, or Ultrafine.
Dial Method Choose from values of Touch-tone, Pulse, or Behind PBX (Dial Tone Detect Off).
Redial Time Choose values of 1 minute through 8 minutes in increments of one minute.
Redial Tries Choose values of 0 Times through 5 Times.
Dial Prefix
1 Press or until None appears, and then press . Now you can change the defaults
for the dial prefix.
2 Press or until Create appears, and then press . Now you can create a dial prefix
if one is needed for an outside line.
Dial Volume Choose a volume of Off, Low, or High.
Scan Choose to scan a document you want to fax before or after you dial.
Max Send Speed Choose a bits per second (bps) number as the data speed for sending faxes. The values range
from 2,400 bps –33,600 bps.
Auto Fax Conversion Choose to set automatic fax conversion On or Off .
Error Correction Choose between values of On or Off.
58