Lexmark 9300 Series - Manual (Page 25)

Note: Setup steps may vary depending on your country or region. For more information on connecting the printer to
telecommunications equipment, see “Using an RJ11 adapter” on page 19.
1 Make sure you have the following:
• A telephone
• An answering machine
• Three telephone cords
• A telephone wall jack
2 Connect one telephone cord into the LINE port of the printer, and then plug it into an active telephone wall jack.
3 Remove the protective plug from the EXT port of the printer.
4 Connect a second telephone cord from the telephone to the answering machine.
25