Memory card troubleshooting, Memory card cannot be inserted, Nothing happens when memory card is inserted – Lexmark 9300 Series User Manual
Page 174
Review banner printing
checklist
•
Use only the number of sheets needed for the banner.
•
Select the following settings to enable the printer to feed paper continuously without
jamming:
1
With a document open, click File
ª Print.
2
Click Properties, Preferences, Options, or Setup.
3
Click the Advanced tab.
4
From the Layout drop-down box, select Banner.
5
From the Banner Paper Size drop-down box, select Letter Banner or A4 Banner
as the paper size.
6
Click the Print Setup tab.
7
From the Orientation area, select Portrait or Landscape.
8
Click OK or Print.
Memory card troubleshooting
•
“Memory card cannot be inserted” on page 174
•
“Nothing happens when memory card is inserted” on page 174
Memory card cannot be inserted
Check memory card type
Make sure that the type of memory card you are using can be used in the printer. For
more information, see “Inserting a memory card” on page 98.
Check memory card
placement
See “Inserting a memory card” on page 98 to determine which slot accommodates your
memory card and to see instructions on how to insert it.
Nothing happens when memory card is inserted
Reinsert memory card
The memory card may have been inserted too slowly. Remove and then reinsert the
memory card quickly.
Check memory card
placement
See “Inserting a memory card” on page 98 to determine which slot accommodates your
memory card and to see instructions on how to insert it.
Check memory card type
Make sure that the type of memory card you are using can be used in the printer. See
“Inserting a memory card” on page 98.
Memory card may be
damaged
Check that there is no obvious damage to the memory card.
Memory card may not
contain photos
Insert another memory card with photos.
The printer will read photos created using the JPEG format. For more information, see
the documentation that came with the digital camera.
USB cable may not be
connected
1
Check the USB cable for any obvious damage.
2
Firmly plug the square end of the USB cable into the back of the printer.
3
Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with the USB symbol
.
174