Inserting a flash drive – Lexmark 9300 Series User Manual
Page 99
MS
XD
SD/M
MC
CF/M
D
PictBr
idge
When the printer recognizes that a memory card is installed, the message
Memory Card Detected appears.
If the printer does not read the memory card, remove and reinsert it. For more information, see “Memory card
troubleshooting” on page 174.
Note:
The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
Inserting a flash drive
1
Insert the flash drive into the PictBridge port on the front of the printer.
MS
XD
SD/M
MC
CF/M
D
PictBrid
ge
Note:
An adapter may be necessary if your flash drive does not fit directly into the port.
2
Wait for the printer to recognize that a flash drive is installed. When the flash drive is recognized, the message
Storage Device Detected appears.
If the printer does not read the flash drive, remove and reinsert it.
Warning:
Do not touch cables, any network adapter, the flash drive, or the printer in the area shown while actively
printing, reading, or writing from the flash drive. A loss of data can occur. Also, do not remove the flash drive while
actively printing, reading, or writing from the flash drive.
MS
XD
SD/M
MC
CF/M
D
PictBr
idge
Note:
The printer recognizes one active media device at a time. If you insert more than one media device, a message
appears on the display prompting you to designate the device you want the printer to recognize.
99