Lexmark 9300 Series User Manual
Page 80
Load up to
Make sure
25 sheets of labels
•
You use full label sheets. Partial sheets (with areas exposed by
missing labels) may cause labels to peel off during printing, resulting
in a paper jam.
•
You load letter- or A4-size label sheets.
•
The print side of the labels faces down.
•
The top of the labels feeds into the printer first.
•
The paper guides rest against the left, right, and bottom edges of the
label sheets.
Note:
Labels require more drying time. Remove each sheet of labels as
it exits, and allow it to dry to avoid ink smudging.
50 transparencies
•
The rough side of the transparencies faces down.
•
You load letter- or A4-size transparencies.
•
You remove any paper backing sheets from the transparencies
before loading.
•
If the transparencies have a removable strip, each strip faces down
toward Tray 1.
•
The paper guides rest against the left, right, and bottom edges of the
transparencies.
Note:
Transparencies require more drying time. Remove each
transparency as it exits, and allow it to dry to avoid ink smudging.
10 iron-on transfers
•
You follow the loading instructions that came with the iron-on
transfers.
•
The print side of the transfers faces you.
•
The paper guides rest against the edges of the transfers.
Note:
For best results, load transfers one at a time.
25 index cards, photo cards, or postcards
•
The thickness does not exceed 0.025 inches (0.635 mm).
•
The print side of the cards faces down.
•
You load the cards in the center of the tray, as indicated by the 4 x 6
photo card outline. Load the cards as shown.
•
The paper guides rest against the left, right, and bottom edges of the
cards.
Note:
Photo cards require more drying time. Remove each photo card
as it exits, and allow it to dry to avoid ink smudging.
80