Lexmark 9300 Series - Manual (Page 136)

Setting up to fax while behind a PBX
If the printer is being used in a business or office, it may be connected to a Private Branch Exchange (PBX) telephone
system. Ordinarily, when dialing a fax number, the printer waits to recognize the dial tone and then dials the fax number.
However, this method of dialing may not work if the PBX telephone system uses a dial tone that is not recognizable to
most fax machines. The “Dialing while behind a PBX” feature enables the printer to dial the fax number without waiting
to recognize the dial tone.
1 From the control panel, press or repeatedly until Fax is highlighted.
2 Press .
3 Press or repeatedly until the Fax Setup submenu is highlighted.
4 Press .
5 Press or repeatedly until the Dialing and Sending submenu is highlighted.
6 Press .
7 Press or repeatedly until you reach the Dial Method menu item.
8 Press or repeatedly until Behind PBX (Dial Tone Detect Off) appears.
9 Press to save and exit.
Customizing fax settings
Customizing settings using the Fax Setup Utility
You can adjust the fax settings in the Fax Setup Utility. These settings apply to the faxes you send or receive.
1 From the desktop, double-click the Productivity Suite icon.
2 Click Fax.
3 Click Change fax settings.
The Lexmark Fax Solutions Software screen appears.
4 Click Adjust speed dial list and other fax settings.
The following screen appears.
136