Can receive but not send faxes – Lexmark 9300 Series User Manual

Page 164

Advertising
background image

Make sure Fax
Forwarding is not
selected

1

From the control panel, press

or

repeatedly until

Fax is highlighted.

2

Press .

3

Press

or

repeatedly until the

Fax Setup submenu is highlighted.

4

Press .

5

Press

or

repeatedly until the

Ringing and Answering submenu is

highlighted.

6

Press .

7

Press

or

repeatedly until you reach

Fax Forward.

8

Press

or

repeatedly until

Off appears.

9

Press

to save the setting.

Can receive but not send faxes

Check mode selection To make sure the printer is set for faxing:

1

Press

or

repeatedly until

Fax is highlighted.

2

Press .

Check document
placement

Load the original document faceup in the Automatic Document Feeder (ADF) or facedown
on the scanner glass in the corner indicated by the arrows.

Check the Dial Prefix
setting

1

From the control panel, press

or

repeatedly until

Fax is highlighted.

2

Press .

3

Press

or

repeatedly until the

Fax Setup submenu is highlighted.

4

Press .

5

Press

or

repeatedly until the

Dialing and Sending submenu is highlighted.

6

Press .

7

Press

or

repeatedly until you reach

Dial Prefix.

8

To change the setting, press

or

repeatedly until

Create appears.

9

Press .

10

Enter the prefix to be dialed before each telephone number.

11

Press to save.

Check Speed Dial
number

Check to make sure Speed Dial has been programmed for the number that you want to
dial. See “Setting up Speed Dial numbers” on page 132.

As an alternative, dial the telephone number manually.

164

Advertising