Lexmark 9300 Series - Manual (Page 183)

Error message Solution
Phone Line Busy The printer automatically redials three times at 2-minute intervals. You
can change the default settings to redial up to five times at intervals of
up to 8 minutes.
To change the redial settings:
1 From the control panel, press or repeatedly until Fax is
highlighted.
2 Press .
The Fax Mode menu appears.
3 Press or repeatedly until Fax Setup is highlighted.
4 Press .
5 Press or repeatedly until Dialing and Sending is
highlighted.
6 Press .
7 To change the length of time between redials:
a Press or repeatedly until Redial Time is highlighted.
b Press or until the option you want appears.
c Press .
8 To change the number of times the printer redials:
a Press or repeatedly until Redial Tries is highlighted.
b Press or until the option you want appears.
c Press .
You can also postpone sending your fax until a later time. For more
information, see “Sending a broadcast fax at a scheduled time” on
page 128.
Phone Line Error If the telephone line is being used by another device, wait until the other
device is finished before sending the fax.
Make sure cable connections for the following hardware are secure, if
applicable:
• Power supply
• Telephone
• Handset
• Answering machine
Are you sending a fax while you listen to a call (On Hook)? Enter a fax
number immediately. For more information, see “Sending a fax while
listening to a call (On Hook Dial)” on page 129.
183