Lexmark 9300 Series - Manual (Page 88)

9 Press or until you reach the size of the paper loaded in Tray 2. The size should be the same size loaded into
Tray 1.
10 Press or repeatedly until the Type - Tray 2 submenu is highlighted.
11 Press or until you reach the paper type loaded in Tray 2. The type should be the same type loaded into Tray
1.
If you want, you can select Auto Detect.
12 Press or repeatedly until the Tray Linking submenu is highlighted.
13 Press or until you reach Auto.
Tray linking is now set only if you press ; however, you still need to define the default tray for each of the following
submenus, so continue with the following steps.
Note: Defining the tray in each of the submenus tells the printer which tray it will feed paper from when it prints a
copy, photo, print, fax, PictBridge, or Bluetooth job.
14 Press or repeatedly until the Copy Source submenu is highlighted.
15 Press or to specify the tray you want as the copy source.
16 Press or repeatedly until the Photo Source submenu is highlighted.
17 Press or to specify the tray you want as the photo source.
18 Press or repeatedly until the Print Files Source submenu is highlighted.
19 Press or to specify the tray you want as the source for printing files.
20 Press or repeatedly until the Fax Source submenu is highlighted.
21 Press or to specify the tray you want as the fax source.
22 Press or repeatedly until the PictBridge Source submenu is highlighted.
23 Press or to specify the tray you want as the PictBridge source.
24 Press or repeatedly until the Bluetooth Source submenu is highlighted.
25 Press or to specify the tray you want as the Bluetooth source.
26 Press to save the values as settings.
The message New Default Settings Saved appears.
The control panel display returns to the Setup submenu.
Disabling tray linking
To disable tray linking, set the Tray Linking submenu to Off.
88