Lexmark 9300 Series - Manual (Page 175)

Error messages
General error messages
Error message Solution
Hardware Error 1208 (Incorrect
Home Position) 1 Raise the scanner unit.
2 Remove any objects blocking the path of the print cartridge carrier.
3 Close the scanner unit.
4 Press .
Rear Cover Open 1 Close the rear door.
2 Press .
Scanner Jam
Press to reset the printer, and then press again to clear the error
message.
Error messages related to loading paper and original documents
Error message Solution
Invalid Paper Type
(appears when there is an incoming fax)
1 Load plain paper in Tray 1.
2 Press .
Paper Load Error 1 Load the original document in the Automatic Document Feeder
(ADF). For more information, see “Loading original documents into
the Automatic Document Feeder” on page 85.
2 From the control panel, press .
Paper or Photo Size Error
(appears when printing from a
PictBridge-enabled digital camera and the
photo size selected is larger than the paper
size set in the printer)
1 From the control panel, press .
The Pictbridge Default Print Settings appears with the
option for Photo Size highlighted.
2 Press or until the size of the photo paper loaded in the printer
appears. If you want to print more than one photo on the photo paper,
select a smaller photo size than the size of the photo paper loaded
in the printer.
3 Press to save the settings.
Paper Jam Clear the paper jam. For more information, see “Jams and misfeeds
troubleshooting” on page 166.
175