Using the paper handling submenu, Using the change printer default settings submenu – Lexmark 9300 Series User Manual
Page 54
Note:
The user default setting remains in effect until you access the menu again, choose another value, and save it.
An asterisk (*) appears next to the user default setting.
Using the Paper Handling submenu
You can select the size and type of paper loaded into the trays from this submenu. It appears with different menu items
depending on whether the optional Tray 2 is installed.
Notes:
•
The Paper Handling submenu is available in other menus besides the
Setup menu.
•
Tray 1 is the factory default setting.
1
From the
Setup menu, press
or
repeatedly until
Paper Handling is highlighted.
2
Press .
3
After changing values, press
to save these values and exit this submenu.
Use this
To
Size
1
Specify the size of the paper loaded.
Type
1
Specify the type of paper loaded.
Size - Tray 1
2
Specify the size of the paper loaded in Tray 1.
Type - Tray 1
2
Specify the type of paper loaded in Tray 1.
Size - Tray 2
2
Specify the size of the paper loaded in Tray 2.
Type - Tray 2
2
Specify the type of paper loaded in Tray 2.
Tray Linking
2
Set tray linking off or to automatic (on).
Copy Source
2
Specify the source, Tray 1 or Tray 2, for the job.
Photo Source
2
Specify the source, Tray 1 or Tray 2, for the job.
Print Files Source
2
Specify the source, Tray 1 or Tray 2, for the job.
Fax Source
2
Specify the source, Tray 1, Tray 2, or Auto for the job.
Note:
Select Auto so the printer uses paper from the tray containing the paper
that matches the size of the incoming fax. Specify the correct paper size for both
trays.
PictBridge Source
2
Specify the source, Tray 1 or Tray 2, for the job.
Bluetooth Source
2
Specify the source, Tray 1 or Tray 2, for the job.
1
Menu item appears only when the optional Tray 2 is not installed.
2
Menu item appears only when the optional Tray 2 is installed.
Using the Change Printer Default Settings submenu
1
From the
Setup menu, press
or
repeatedly until
Change Printer Default Settings is highlighted.
2
Press .
3
After changing values, press
to save the values as default settings and exit this submenu.
54