Refer to – Polycom SOUNDPOINT SIP 3.1 User Manual
Page 137
Configuring Your System
4 - 83
For more information on encrypting configuration files including determining
whether an encrypted file is the same as an unencrypted file and using the
SDK to facilitate key generation, refer to
Encrypting Configuration Files
page
Configuration changes can performed centrally at the boot server:
Configuring SoundPoint IP / SoundStation IP Phones Locally
A local phone-based configuration web server is available, unless it is disabled
through sip.cfg. It can be used as the only method of modifying phone
configuration or as a distributed method of augmenting a centralized
provisioning model. For more information, refer to
on
page
The phone’s local user interface also permits many application settings to be
modified, such as SIP server address, ring type, or regional settings such as
time/date format and language.
Central
(boot server)
Configuration File:
sip.cfg
Specify the phone-specific contact directory and the
phone-specific configuration override file.
•
For more information, refer to
on page
.
Configuration file:
<device>.cfg
Change the encryption key.
•
For more information, refer to refer to
.
Local Web
Server Access
Point your web browser to http://<phoneIPAddress>/.
Configuration pages are accessible from the menu along the top banner.
The web server will issue an authentication challenge to all pages except for
the home page.
Credentials are (case sensitive):
User Name: Polycom
Password: The administrator password is used for this.
Local Settings
Menu Access
Some items in the Settings menu are locked to prevent accidental changes.
To unlock these menus, enter the user or administrator passwords.
The administrator password can be used anywhere that the user password is
used.
Factory default passwords are:
User password: 123
Administrator password: 456