Polycom SOUNDPOINT SIP 3.1 - Manual (Page 174)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 20
This configuration attribute is defined as follows:
Routing <routing/>
This attribute allows the user to create a specific routing path for outgoing SIP
calls independent of other “default” configurations.
This attribute also includes:
• Server <server/>
• Emergency <emergency/>
Attribute Permitted Values Default Interpretation
dialplan.digitmap string compatible with the
digit map feature of
MGCP described in 2.1.5
of RFC 3435. String is
limited to 768 bytes and
30 segments; a comma is
also allowed; when
reached in the digit map,
a comma will turn dial
tone back on;’+’ is allowed
as a valid digit; extension
letter ‘R’ is used as
defined above. [2-9]11
|0T|
+011xxx.T|
0[2-9]xxxxxxxxx|
+1[2-9]xxxxxxxx|
[2-9]xxxxxxxxx|
[2-9]xxxT
When this attribute is
present, number-only dialing
during the setup phase of
new calls will be compared
against the patterns therein
and if a match is found, the
call will be initiated
automatically eliminating the
need to press Send.
Attributes
dialplan.applyToCallLis
tDial ,
dialplan.applyToDirecto
ryDial ,
dialplan.applyToUserDia
l , and
dialplan.applyToUserSen
d control the use of match
and replace in the dialed
number in the different
scenarios.
dialplan.digitmap.timeOut string of positive integers
separated by ‘|’ 3 | 3 | 3 | 3 | 3 | 3 Timeout in seconds for each
segment of digit map.
Note: If there are more digit
maps than timeout values,
the default value of 3 will be
used. If there are more
timeout values than digit
maps, the extra timeout
values are ignored.