Polycom SOUNDPOINT SIP 3.1 - Manual (Page 179)

Configuration Files
A - 25
Date and Time <datetime/>
This configuration attribute is defined as follows:
User Preferences <up/>
This configuration attribute is defined as follows:
Attribute
Permitted
Values
Interpretation
lcl.datetime.time.24HourClock 0,1 If set to 1, display time in 24-hour clock mode rather
than a.m./p.m.
lcl.datetime.date.format string which
includes ‘D’, ‘d’
and ‘M’ and two
optional commas Controls format of date string.
D = day of week
d = day
M = month
Up to two commas may be included.
For example: D,dM = Thursday, 3 July or Md,D = July
3, Thursday
The field may contain 0, 1 or 2 commas which can
occur only between characters and only one at a time.
For example: “D,,dM” is illegal.
lcl.datetime.date.longFormat 0,1 If set to 1, display the day and month in long format
(Friday/November), otherwise, use abbreviations
(Fri/Nov).
lcl.datetime.date.dateTop 0, 1 If set to 1, display date above time else display time
above date.
Attribute
Permitted
Values
Default Interpretation
up.headsetMode 0,1 0 If set to 1, the headset will be selected as the
preferred transducer after its first use until the
headset key is pressed again; otherwise,
hands-free will be selected preferentially over
the headset.
up.useDirectoryNames 0,1 0 If set to 1, the name fields of directory entries
which match incoming calls will be used for
caller identification display and in the call lists
instead of the name provided through network
signaling.
up.oneTouchVoiceMail 0, 1 0 If set to 1, the voice mail summary display is
bypassed and voice mail is dialed directly (if
configured).
up.welcomeSoundEnabled 0, 1 1 If set to 1, play welcome sound effect after a
reboot.