Upgrading sip application, Upgrading sip application –19 – Polycom SOUNDPOINT SIP 3.1 User Manual
Page 51
Setting up Your System
3 - 19
Upgrading SIP Application
You can upgrade the SIP application that is running on the SoundPoint IP and
SoundStation IP phones in your organization. The exact steps that you
perform are dependent on the version of the SIP application that is currently
running on the phones and the version that want to upgrade to.
The bootROM, application executable, and configuration files can be updated
automatically through the centralized provisioning model. These files are
read-only by default.
Most organization can use the instructions shown in the next section,
Supporting SoundPoint IP and SoundStation IP Phones
.
However, if your organization has a mixture of SoundPoint IP 300 and/or 500
phones deployed along with other models, you will need to change the phone
configuration files to continue to support the SoundPoint IP 300 and IP 500
phones when software releases SIP 2.2.0 or later are deployed. These models
were discontinued as of May 2006. In this case, refer to
on page
.
Supporting SoundPoint IP and SoundStation IP Phones
To automatically update:
1.
Back up old application and configuration files.
The old configuration can be easily restored by reverting to the backup
files.
2.
Customize new configuration files or apply new or changed parameters
to the old configuration files.
Differences between old and new versions of configuration files are
explained in the Release Notes that accompany the software. Both
mandatory and optional changes may present. Changes to site-wide
configuration files such as sip.cfg can be done manually, but a scripting
tool is useful to change per-phone configuration files.
Warning
The SoundPoint IP 300 and 500 phones will be supported on the latest
maintenance patch release of the SIP 2.1 software stream—currently SIP 2.1.3.
Any critical issues that affect SoundPoint IP 300 and 500 phones will be addressed
by a maintenance patch on this stream until the End of Life date for these products.
Phones should be upgraded to BootROM 4.0.0 for these changes to be effective.