Polycom SOUNDPOINT SIP 3.1 User Manual
Page 172
Administrator’s Guide SoundPoint IP / SoundStation IP
A - 18
This attributes also includes:
•
•
Digit Map <digitmap/>
A digit map is defined either by a “string” or by a list of strings. Each string in
the list is an alternative numbering scheme, specified either as a set of digits or
timers, or as an expression over which the gateway will attempt to find a
shortest possible match.
Digit map extension letter “R” indicates that certain matched strings are
replaced. The following examples shows the semantics of the syntax:
• R9RRxxxxxxx—Remove 9 at the beginning of the dialed number
— For example, if a customer dials 914539400, the first 9 is removed
when the call is placed.
• RR604Rxxxxxxx—Prepend 604 to all 7 digit numbers
— For example, if a customer dials 4539400, 604 is added to the front of
the number, so a call to 6044539400 is placed.
• R9R604Rxxxxxxx—Replaces 9 with 604
• R999R911R—Convert 999 to 911
• xxR601R600Rxx—When applied on 1160122 gives 1160022
• xR60xR600Rxxxxxxx—Any 60x will be replaced with 600 in the middle of
the dialed number that matches
dialplan.applyToUserSend
0, 1
1
This attribute covers the case when the user
presses the Send soft key to send the dialed
number.
Value interpretation is the same as for
dialplan.applyToCallListDial.
dialplan.impossibleMatchHandling
0, 1 or 2
0
If set to 0, the digits entered up to and
including the point where an impossible
match occurred are sent to the server
immediately.
If set to 1, give reorder tone.
If set to 2, allow user to accumulate digits and
dispatch call manually with the Send soft key.
dialplan.removeEndOfDial
0, 1
1
If set to 1, strip trailing # digit from digits sent
out.
Attribute
Permitted
Values
Default
Interpretation