Message waiting indication, Distinctive incoming call treatment – Polycom SOUNDPOINT SIP 3.1 User Manual
Page 60
Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 6
Configuration changes can performed centrally at the boot server or locally:
Message Waiting Indication
The phone will flash a message-waiting indicator (MWI) LED when instant
messages and voice messages are waiting.
Configuration changes can performed centrally at the boot server:
Distinctive Incoming Call Treatment
The phone can automatically apply distinctive treatment to calls containing
specific attributes. The distinctive treatment that can be applied includes
customizable alerting sound effects and automatic call diversion or rejection.
Call attributes that can trigger distinctive treatment include the calling party
name or SIP contact (number or URL format).
For related configuration changes, refer to
on page
.
Note
L16/16000 is not supported on SoundPoint IP 301 and SoundStation IP 4000
phones. L16/32000 and L16/48000 are only supported on SoundPoint IP 7000
phones.
Note
The alternate sampled audio sound effect files must be present on the boot server
or the Internet for downloading at boot time.
Central
(boot server)
Configuration File:
sip.cfg
Specify patterns used for sound effects and the individual tones or
sampled audio files used within them.
•
For more information, refer to
Sampled Audio for Sound Effects
on page
on page
.
Local
Web Server
(if enabled)
Specify sampled audio wave files to replace the built-in defaults.
Navigate to http://<phoneIPAddress>/coreConf.htm#sa
Changes are saved to local flash and backed up to <Ethernet
address>-phone.cfg on the boot server. Changes will permanently
override global settings unless deleted through the Reset Local
Config menu selection and the <Ethernet address>-phone.cfg is
removed from the boot server.
Central
(boot server)
Configuration file:
phone1.cfg
Specify per-registration whether the MWI LED is enabled or disabled.
•
For more information, refer to
Message Waiting Indicator <mwi/>
on page
Specify whether MWI notification is displayed for registration x
(pre-SIP 2.1 behavior is enabled).
•
For more information, refer to
on page
.