Polycom SOUNDPOINT SIP 3.1 - Manual (Page 269)

Configuration Files
A - 115
Busy <busy/>
Calls can be automatically diverted when the phone is busy.
No Answer <noanswer/>
The phone can automatically divert calls after a period of ringing.
Attribute Permitted Values Default Interpretation
divert.busy.x.enabled 0, 1 1 If set to 1, calls will be
forwarded on busy to the
contact specified below.
Note: If server-based call
forwarding is enabled, this
parameter is disabled.
divert.busy.x.timeout positive integer 60 Time in seconds to allow
altering before initiating the
diversion.
divert.busy.x.contact ASCII encoded string
containing digits (the user part
of a SIP URL) or a string that
constitutes a valid SIP URL
(6416 or [email protected] Null Forward-to contact for calls
forwarded due to busy status, if
Null, divert.x.contact will be
used.
Attribute Permitted Values Default Interpretation
divert.noanswer.x.enabled 0, 1 1 If set to 1, calls will be
forwarded on no answer to the
contact specified.
Note: If server-based call
forwarding is enabled, this
parameter is disabled.
divert.noanswer.x.timeout positive integer 60 Time in seconds to allow
altering before initiating the
diversion.
divert.noanswer.x.contact ASCII encoded string
containing digits (the user part
of a SIP URL) or a string that
constitutes a valid SIP URL
(6416 or [email protected]) Null Forward-to contact used for
calls forwarded due to no
answer, if Null,
divert.x.contact
will be
used.