Polycom SOUNDPOINT SIP 3.1 - Manual (Page 260)

Administrator’s Guide SoundPoint IP / SoundStation IP
A - 106
Per-Phone Configuration
This section covers the parameters in the per-phone example configuration file
phone1.cfg. This file would normally be used as a template for the per-phone
configuration files. For more information, refer to Deploying Phones From the
Boot Server on page 3-14 .
The parameters include:
• Registration <reg/>
• Calls <call/>
• Diversion <divert/>
• Dial Plan <dialplan/>
• Messaging <msg/>
• Network Address Translation <nat/>
• Attendant <attendant/>
• Roaming Buddies <roaming_buddies/>
• Roaming Privacy <roaming_privacy/>
softkey.feature.buddies 0 or 1 1 If set to 0, the Buddies soft key is not
displayed.
If set to 1 or Null, the Buddies soft key is
displayed.
Note: pres.idleSoftKeys must be set to
1 for this soft key to be displayed.
softkey.feature.
basicCallManagement.redundant
0 or 1 1 If set to 0 and the phone has hard keys
mapped for Hold, Transfer, and
Conference functions (all must be
mapped), all of these soft keys are not
displayed.
If set to 1 or Null, all of these soft keys are
displayed.
Attribute
Permitted
Values
Default Interpretation
Polycom recommends that you create another file with your organization’s
modifications. If you must change any Polycom templates, back them up first.
For more information, refer to the “Configuration File Management on SoundPoint
IP Phones” whitepaper at
www.polycom.com/support/voice/ .