Polycom SOUNDPOINT SIP 3.1 - Manual (Page 66)

Administrator’s Guide SoundPoint IP / SoundStation IP
4 - 12
Local Digit Map
The phone has a local digit map feature to automate the setup phase of
number-only calls. When properly configured, this feature eliminates the need
for using the Dial or Send soft key when making outgoing calls. As soon as a
digit pattern matching the digit map is found, the call setup process will
complete automatically. The configuration syntax is based on
recommendations in 2.1.5 of RFC 3435. The phone behavior when the user
dials digits that do not match the digit map is configurable. It is also possible
to strip a trailing # from the digits sent or to replace certain matched digits
(with the introduction of “R” to the digit map).
sd Null, 1 to 9999 speed-dial index
Associates a particular entry with a speed dial bin for one-touch
dialing or dialing from the speed dial menu.
Note: On the SoundPoint IP 330/320 and the SoundStation IP 6000
and 7000, the maximum speed-dial index is 99.
rt Null, 1 to 21 ring type
When incoming calls can be associated with a directory entry by
matching the address fields, this field is used to specify ring type to
be used.
dc UTF-8 encoded string
containing digits (the
user part of a SIP
URL) or a string that
constitutes a valid SIP
URL divert contact
The forward-to address for the autodivert feature.
ad 0,1 auto divert
If set to 1, automatically diverts callers that match the directory entry
to the address specified in divert contact.
Note: If auto-divert is enabled, it has precedence over auto-reject.
ar 0,1 auto-reject
If set to 1, automatically rejects callers that match the directory entry.
Note: If auto-divert is also enabled, it has precedence over
auto-reject.
bw 0,1 buddy watching
If set to 1, add this contact to the list of watched phones.
bb 0,1 buddy block
If set to 1, block this contact from watching this phone.
Element Permitted Values Interpretation