Nortel Networks NN43001-318 - Manual (Page 24)

24 Installing ISDN BRI hardware
Figure 5
Connect the ISDN BRI terminals to the Large System
Procedure 8
Connect the modules to the MDF
Step Action
Modules connect to the MDF using NE-A25B cables with 50-pin D-type male
connectors on each end. One end of the cable plugs into the Input/Output
(I/O) panel at the rear of the module, and the other end plugs into the MDF.
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2003-2007, Nortel Networks
.