Nortel Networks NN43001-318 - Manual (Page 92)

92 Testing ISDN BRI functions
This feature gives the calling and the called parties the option of displaying
the calling line identification as follows:
• The called party ISDN BRI terminal must have the calling line
presentation (CLIP) parameter value set to
YES to accept the calling line
identification and show it on its display.
• If there is an option on the ISDN BRI terminal that enables the calling
party to allow or restrict the presentation of the calling line ID on a per
call basis, select the option to allow presentation. This option on the
terminal overrides the PRES parameter values entered in the TSP
data block when configuring the TSP. This depends on the telephone
configuration default. See "TSP configuration procedures" in ISDN
Basic Rate Interface Feature Fundamentals (NN43001-580).
Procedure 30
Perform a Calling Line Identification Presentation test
Step Action
1 Configure both the calling and the called party ISDN BRI terminal
DN with CLIP =
YES and PRES = YES .
2 Place a call from one terminal to the other and observe the display
on the called party ISDN BRI terminal. The Calling Line Identification
should be displayed during ringing and for the duration of the call.
3 Release the call at the called or calling party terminal.
4 Set PRES = NO in the TSP data block for the calling party ISDN BRI
terminal. If the calling party ISDN BRI terminal has an option on the
set to allow or restrict the presentation of the calling party number,
select the option to allow presentation and place a call to another
ISDN BRI terminal.
5 Observe the called party ISDN BRI terminal display. You should
see the number being displayed.
6 Release the call connection.
—End—
ISDN BRI Conference (National ISDN-1 and ETSI)
ISDN BRI Conference allows an ISDN BRI terminal user to bridge multiple
parties into a conversation. The user can:
• invoke Conference on a call
• add a new party to an existing call
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2003-2007, Nortel Networks
.