Nortel Networks NN43001-318 - Manual (Page 74)

74 Configuring ISDN BRI hardware
Figure 27
Cross-connecting a UILC port to the office wiring
Procedure 22
Connecting the terminating resistor to the SILC DSL
Step Action
1 Plug the end of the SILC DSL to the RJ-45 jack on the terminating
resistor (A0378866) resistor.
—End—
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2003-2007, Nortel Networks
.