Nortel Networks NN43001-318 - Manual (Page 66)

66 Configuring ISDN BRI hardware
Figure 19
Connecting ISDN BRI terminals to the system
Procedure 20
Connecting system cables to the cross-connect terminal
Step Action
Each card slot equipped with a SILC or UILC requires one NE-A25B 25-pair
connector cable.
1 Remove the connector retaining bar from the connector panel in
the lower part of each cabinet. See
Figure 20 "Cable connectors in
Nortel Communication Server 1000
ISDN Basic Rate Interface Installation and Commissioning
NN43001-318 01.02 Standard
Release 5.0 20 June 2007
Copyright © 2003-2007, Nortel Networks
.