Tally Genicom 6600 - Manual (Page 198)

198
Chapter 9 PGL Commands
Listen Command (Normal)
This command re-enables the PGL Mode of your printer after a Quiet
Command. The printer will respond appropriately to PGL Commands it
receives. The following command enables Graphics Mode:
Reset Command (Normal and Execute)
this command deletes ALL forms and logos from printer memory and resets
configuration parameters to their default values. If forms and logos have been
loaded by other users they will be deleted also. You may also eliminate forms
and logos by sending a Delete Form or Delete Logo Command. The Reset
Command is:
Table 34. Listen Command
Field Function Option/Modifier Selections
LISTEN Command Specifier. Turns off
Graphics Mode. Enter the current Special Function Control
Character followed by LISTEN.
Table 35. Reset Command
Field Function Option/Modifier Selections
RESET Erases ALL forms and logos from
printer memory. Enter the current Special Function Control
Character followed by RESET.