Tally Genicom 6600 - Manual (Page 29)

29
The following examples illustrate block character printing.
Example 1: The Graphics Pass ^M0202000Graphics ^- prints:
^M Horizontal orientation of character.
02 Character height of 0.2 inches (0.51 cm).
02 Character width of 0.2 inches (0.51 cm).
00 Justified downward 0.00 inches.
0 No additional dot rows of justification down.
Graphics Data to be printed.
^- Pass Terminator.
Example 2: The Graphics Pass ^M0302000Graphics^- prints:
^M Indicates this Graphic Pass is oriented horizontally.
03 Character height of 0.3 inches (0.76 cm).
02 Character width of 0.2 inches (0.51 cm).
00 No justification down.
0 No additional dot rows of justification down.
Graphics Data to be printed 0.3 inches high and 0.2 inches
wide.
Example 3: The Graphics Pass ^U0303000Graphics^- prints:
^U Rotated 180 degrees from the horizontal
orientation.
03 Character height of 0.3 inches (0.76 cm).
03 Character width of 0.3 inches (0.76 cm).
00 No justification down.
Graphics Block characters to be printed in the upside down
orientation.