Tally Genicom 6600 - Manual (Page 69)

Barcode Version 2
69
First Command:
^M0505000^IFONT,S,1^G^IBARC,C128,B,Horizontal^G
^M0505000 Causes barcode to print horizontally with a height
of 0.5 inches.
^IFONT,S,1^G
Selects Draft 10 CPI characters.
^IBARC,C128,
Turns ON Barcode Mode and selects Code 128
barcode.
B, Prints the character translation below the barcode.
Horizontal Data to be encoded as Code 128 barcode and
printed below the barcode as Draft 10 CPI
characters.
^G Command Terminator
Second Command:
^U0505000^T0250^IBARC,C128,B,Upside^G^-^*
^U0505000 Causes barcode to print upsdie down with a height
of 0.5 inches.
^T0250 Tabs the start of the barcode 2.5 inches from the
left margin.
^IBARC,C128,
Turns ON Barcode Mode and selects Code 128
barcode.
B, Prints the character translation below the barcode.
Upside Data to be encoded as a Code 128 barcode and
printed below the barcode as Draft 10 CPI
characters.
^G Command Terminator
Third Command:
^E0505000^T0000^IBARC,C128,B,Vert Left^G
^E0505000 Causes barcode to print vertical left with a height of
0.5 inches.
^T0000 Places the barcode at the left margin.
^IBARC,C128,
Turns ON Barcode Mode and selects Code 128
barcode.
B, Prints the character translation below the barcode.
Vertical Left Data to be encoded as a Code 128 barcode and
printed below the barcode as Draft 10 CPI
characters.