Tally Genicom 6600 - Manual (Page 67)

Barcode Version 2
67
Example 3: Example 2 may be printed with the human-readable characters
embedded in the barcode by replacing B with an E as shown
below: ^M0505000^IBARC,C39,E,12345^G^- prints:
^M0505000 Sets up horizontal orientation and sets the barcode
height to 0.5 inches.
^IBARC, Turns ON the Barcode Mode.
C39, Selects the first barcode style in Table 3, page 65,
(Code 39).
E, Embeds human-readable characters at the bottom
of the barcode.
12345 The data to be encoded as a barcode and printed
as human readable characters.
^G Command Terminator
Example 4: The human-readable character translation printed below or
embedded in a barcode may be printed in any of the fonts
available with the IFONT command. The command sequence
^M0505000^IFONT,S,1^G^IBARC,C128,B,Rusty Old Car^G^-
prints:
^M0505000 Sets up horizontal orientation and sets the barcode
height to 0.5 inches.
^IFONT,S,1^GSets font to be Draft at 10 CPI.
^IBARC Turns ON the Barcode Mode.
C128 Selects Code 128 (see Table 3, page 65).
B Print human-readable characters below the
barcode.
Rusty Old Car
The data to be encoded as a barcode with human-
readable characters.
^G Command Terminator