Logos, Version 1 logos – Tally Genicom 6600 User Manual
Page 58
58
Chapter
3
Logos
The X is drawn dot by dot as illustrated in Figure 2.
Figure 2. Plot Mode Example
Logos
A set of predefined logos come with Code V. See Appendix C, “Logos” on
page 271 for a table of logos. The first twelve are available in all four
orientations; the last two only work in horizontal and upside down orientations.
There are two commands for printing logos: Version 1 Command and Version
2 Command. The Version 1 Command can only print the copyright and
registered trademark logos, the Version 2 Command prints all the logos.
Version 1 Logos
The Version 1 logo command can only print the horizontal registered
trademark and copyright logos. The logo command must be within a Graphics
Pass.
Command ^Zn
Arguments
^Z
Version 1 logo command
n
Either 1 or 2. A value of 1 prints ® and a value of 2
prints ©.
Example:
The command sequence ^M0404REGISTER^Z1^- prints: