Tally Genicom 6600 - Manual (Page 85)

Pass Height
85
Pass Height
This function changes the height of block characters and barcodes within a
Graphics Pass.
Command ^Hxx
Arguments
^H Pass Height Command
xx New window height in increments of 0.1 inches
(0.25 cm) from 01 to 99. The actual height ranges
from 0.1 to 9.9 inches (0.3 to 25.2 cm).
Example: The Graphics Pass, ^M0402000GRA ^H02PHIC^- prints:
^M Horizontal orientation of characters.
04 Window height of 0.4 inches (1.02 cm).
02 Window width of 0.2 inches (0.51 cm).
00 No justification down.
0 No additional dot row justification down.
GRA Data to be printed at 0.4 inches (1.02 cm) high.
^H Indicates a change in character height.
02 New character height of 0.2 inches (0.51 cm).
PHIC Data to be printed at 0.2 inches (0.51 cm) high.