Tally Genicom 6600 - Manual (Page 49)

49
3
Creating Lines And
Graphics
Line Drawing
Code V allows printing of solid or dashed lines of various thicknesses and
orientations. The following sections describe the line drawing commands and
their usage.
Solid Lines
Description Solid lines can be printed horizontally and vertically ranging in
width and length from one dot to 13.2 inches. The solid line
command is:
Command ^LShhhdvvvd
Arguments
^LS Solid Line command
hhh The horizontal dimensions, specified in increments of 0.1 inches
(0.25 cm), ranging from 000 to 132 (0 to 13.2 inches or 0 to
33.6 cm).
d Additional dot columns, ranging from 0 to 9 dot-columns.
vvv The vertical dimensions, specified in increments of 0.1 inches
(0.25 cm), ranging from 000 to 132 (0 to 13.2 inches or 0 to 33.6
cm).
d Additional dot columns, ranging from 0 to 9 dot-columns.
NOTE: The length and thickness of a line must be at least one dot.