Tally Genicom 6600 - Manual (Page 30)

30
Chapter 2 Block Character
Example 4: The Graphics Pass ^E0101000Vertical Left^_ prints:
^E Vertical left orientation of the pass.
01 Character height of 0.1 inches (0.25 cm).
01 Character width of 0.1 inches (0.25 cm).
00 No justification down.
0 No additional dot rows of justification down.
Example 5: The Graphics Pass ^M0202000GRAPHICS
^M0203053OPTION^- prints:
• First Command - ^M0202000GRAPHICS
^M Horizontal orientation of the Graphics Pass.
02 Character height of 0.2 inches (0.51 cm).
02 Character width of 0.2 inches (0.51 cm).
000 No vertical justification.
GRAPHICS Data printed at 0.2 inches high and 0.2 inches
wide.
• Second Command - ^M0203053OPTION^-
^M Horizontal orientation of the Graphics Pass.
02 Character height of 0.2 inches (0.51 cm).
03 Character width of 0.3 inches (0.76 cm).
05 Justification down of 0.5 inches (1.27 cm).
3 An additional three dot rows of justification down.
OPTION Data printed at 0.2 inches high and 0.3 inches wide
with downward justification of 0.5 inches plus three
dot rows.