Airports, Flight management – Garmin G1000 King Air C90GT User Manual

Page 182

Advertising
background image

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT

190-00663-01 Rev. A

168

FLIGHT MANAGEMENT

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

Figure 5-31 Waypoint Information Window - Duplicate Identifier

Duplicate Message

Identifier with

Duplicates

Duplicate

Waypoints

AIRPORTS

NOTE:

‘North Up’ orientation on the Airport Information Page cannot be changed; the pilot needs to be

aware of proper orientation if the Navigation Map orientation is different from the Airport Information Page
Map.

The Airport Information Page is the first page in WPT group and allows the pilot to view airport information,

load frequencies (COM, NAV, and lighting), review runways, and review instrument procedures that may be
involved in the flight plan. See the Audio Panel and CNS Section for more information on loading frequencies
(auto-tuning). After engine startup, the Airport Information Page defaults to the airport where the aircraft is
located. After a flight plan has been loaded, it defaults to the destination airport. On a flight plan with multiple
airports, it defaults to the airport which is the current active waypoint.

In addition to displaying a map of the currently selected airport and surrounding area, the Airport Information

Page displays airport information in three boxes labeled ‘AIRPORT’, ‘RUNWAYS’, and ‘FREQUENCIES’. For
airports with multiple runways, information for each runway is available.

Advertising
This manual is related to the following products: