System overview – Garmin G1000 King Air C90GT User Manual

Page 35

Advertising
background image

190-00663-01 Rev. A

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT

21

SYSTEM OVERVIEW

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

STRMSCP

Displays Stormscope information on Inset Map (optional)

NEXRAD

Displays NEXRAD weather and coverage on Inset Map (optional)

XM LTNG

Displays XM lightning information on Inset Map (optional)

SENSOR

Displays softkeys for selecting the #1 and #2 AHRS and Air Data Computers

ADC1

Selects the #1 Air Data Computer

ADC2

Selects the #2 Air Data Computer

AHRS1

Selects the #1 AHRS

AHRS2

Selects the #2 AHRS

PFD

Displays second-level softkeys for additional PFD configurations

SYN VIS

Displays the softkeys for enabling or disabling Synthetic Vision features

PATHWAY

Displays rectangular boxes representing the horizontal and vertical flight path of the
active flight plan

SYN TERR

Enables synthetic terrain depiction

HRZN HDG

Displays compass heading along the Zero-Pitch line

APTSIGNS

Displays position markers for airports within approximately 15 nm of the current
aircraft position. Airport identifiers are displayed when the airport is within
approximately 9 nm.

DFLTS

Resets PFD to default settings, including changing units to standard

WIND

Displays softkeys to select wind data parameters

OPTN 1

Total direction and speed

OPTN 2

Total direction with digital direction and magnitude

OPTN 3

Longitudinal and lateral components

OFF

Information not displayed

BRG1

Cycles the Bearing 1 Information Window through NAV1 or GPS waypoint identifier
and GPS-derived distance information, and ADF/frequency.

HSI FRMT

Displays the softkeys for selecting the two HSI formats

360 HSI

Displays HSI as a 360° compass rose

ARC HSI

Displays HSI as a 140° viewable arc

BRG2

Cycles the Bearing 2 Information Window through NAV2 or GPS waypoint identifier
and GPS-derived distance information, and ADF/frequency.

ALT UNIT

Displays softkeys for setting the altimeter and BARO settings to metric units

METERS

When enabled, displays altimeter in meters

IN

Press to display the BARO setting as inches of mercury

HPA

Press to display the BARO setting as hectopacals

STD BARO

Sets barometric pressure to 29.92 in Hg (1013 hPa if metric units are selected)

OBS

Selects OBS mode on the CDI when navigating by GPS (only available with active
leg)

CDI

Cycles through GPS, VOR1, and VOR2 navigation modes on the CDI

Advertising
This manual is related to the following products: