Garmin G1000 King Air C90GT - Manual (Page 70)

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT 190-00663-01 Rev. A 56
FLIGHT INSTRUMENTS
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Changing Vspeeds and turning Vspeed flags on/off:
1) Select the TMR/REF Softkey.
2) Turn the large FMS Knob to highlight the desired Vspeed.
3) Use the small FMS Knob to change the Vspeed in 1-kt increments (when a speed has been changed from a
default value, an asterisk appears next to the speed).
4) Press the ENT Key or turn the large FMS Knob to highlight the ON/OFF field
5) Turn the small FMS Knob clockwise to ON or counterclockwise to OFF.
6) To remove the window, press the CLR Key or select the TMR/REF Softkey.
Figure 2-6 Takeoff and Landing Vspeeds
(Timer/References Window)
Vspeed flags can be turned on or off and values restored all at once or by category (takeoff and landing).
Modifying Vspeeds (on, off, restore defaults):
1) Select the TMR/REF Softkey.
2) Press the MENU Key.
3) Turn the FMS Knob to highlight the desired selection.
4) Press the ENT Key.
5) To remove the window, press the CLR Key or select the TMR/REF Softkey.
Figure 2-7 Page Menu
(Timer/References Window)