Garmin G1000 King Air C90GT - Manual (Page 390)

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT 190-00663-01 Rev. A 376
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Switching from standby mode to operating mode:
1) On the Traffic Page, select the OPERATE Softkey or press the MENU Key and turn the small FMS knob to select
Operating Mode.
2) If using the FMS menu, press the ENT Key to place the SKY497 in the operating mode.
3) To switch to Standby Mode from the Traffic Page, select the STANDBY Softkey.
System Self Test
1) Set the range to 2/6 nm.
2) Select the STANDBY Softkey.
3) Select the TEST Softkey.
4) Self test takes approximately eight seconds to complete. When completed successfully, traffic symbols display
and a voice alert “Traffic Advisory System Test Passed” is heard. If the self test fails, the system reverts to
Standby Mode and a voice alert “Traffic Advisory System Test Failed” is heard.
Displaying traffic on the Traffic Map Page:
1) Turn the large FMS Knob to select the Map Page Group.
2) Turn the small FMS Knob to select the Traffic Map Page.
3) Select the ALT MODE Softkey to change the altitude volume.
4) Select the STANDBY Softkey to place the system in the Standby mode. STANDBY is displayed in the Traffic
mode field.
5) Turn the RANGE Knob clockwise to display a larger area or counter-clockwise to display a smaller area.
Figure 6-99 Traffic Map Page
Operating
Mode
Altitude
Mode
Traffic Advisory,
Aircraft is
400’ Below,
Climbing
Off Scale
Traffic
“Non-Bearing”
Traffic (Bearing
Undetermined),
Distance 8.0 nm,
1100’ Above,
Descending
Proximity
Traffic, 1000’
Above,
Descending
Traffic Display
Range