Hazard avoidance – Garmin G1000 King Air C90GT User Manual

Page 363

Advertising
background image

190-00663-01 Rev. A

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT

349

HAZARD AVOIDANCE

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

The Navigation Map Page Setup Menu provides a means in addition to the softkey for enabling/disabling

display of terrain and obstacles. The setup menu also controls the map range settings above which terrain and
obstacle data are decluttered from the display. If a map range larger than the map range setting is selected, the
data is removed from the map.

Terrain data can be selected for display independently of obstacle data; however, obstacles for which warnings

and cautions are issued are shown when terrain is selected for display and the map range is within the setting
limit.

Maps besides the TAWS-B Page use settings based on those selected for the Navigation Map Page. The

maximum display ranges for obstacles on each map are dependent on the range setting made for the Navigation
Map. If the maximum range for obstacle display on the Navigation Map is adjusted to below 20 nm, the highest
obstacle display range settings on the other applicable maps are also adjusted proportionally.

Customizing terrain and obstacle display on the Navigation Map Page:

1)

Select the Navigation Map Page.

2)

Press the MENU Key.

3)

With ‘Map Setup’ highlighted, press the ENT Key (Figure 6-72).

4)

Turn the small FMS Knob to select the ‘Map’ Group and press the ENT Key (Figure 6-73).

5)

Turn the large FMS Knob or press the ENT Key to scroll through product selections (Figure 6-74).

TERRAIN DATA – Turns the display of terrain data on or off and sets maximum range at which terrain is shown

OBSTACLE DATA – Turns the display of obstacle data on or off and sets maximum range at which obstacles are shown

6)

Turn the small FMS Knob to scroll through options for each product (ON/OFF, range settings).

7)

Press the ENT Key to select an option.

8)

Press the FMS Knob or CLR Key to return to the Navigation Map Page with the changed settings.

Figure 6-73 Navigation Map Page Setup Menu

Figure 6-72 Navigation Map Page Menu

Figure 6-74 Navigation Map Page Setup Menu, Map Group

Advertising
This manual is related to the following products: