Flight management, Editing user waypoints – Garmin G1000 King Air C90GT User Manual
Page 197
190-00663-01 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
183
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
Creating user waypoints from map pages:
1)
Press the Joystick to activate the panning function and pan to the map location of the desired user waypoint.
2)
Press the ENT Key. The User Waypoint Information Page is displayed with the captured position.
NOTE:
If the pointer has highlighted a map database feature, one of three things happens upon pressing
the ENT Key: 1) information about the selected feature is displayed instead of initiating a new waypoint,
2) a menu pops up allowing a choice between ‘Review Airspaces’ or ‘Create User Waypoint’, or 3) a new
waypoint is initiated with the default name being the selected map item.
3)
Enter a user waypoint name (up to six characters).
4)
Press the ENT Key to accept the selected name. The first reference waypoint box is highlighted.
5)
If desired, define the type and location of the waypoint in one of the following ways:
a)
Select “RAD/RAD” using the small FMS Knob, press the ENT Key, and enter the two reference waypoint
identifiers and radials into the REFERENCE WAYPOINTS window using the FMS Knobs.
Or
:
b)
Select “RAD/DIS” using the small FMS Knob, press the ENT Key, and enter the reference waypoint identifier,
the radial, and the distance into the REFERENCE WAYPOINTS window using the FMS Knobs.
Or
:
c)
Select “LAT/LON” using the small FMS Knob, press the ENT Key, and enter the latitude and longitude into
the INFORMATION window using the FMS Knobs.
6)
Press the ENT Key to accept the new waypoint.
7)
If desired, change the storage method of the waypoint to “TEMPORARY” or “NORMAL” by moving the cursor
to “TEMPORARY” and selecting the ENT Key to check or uncheck the box.
8)
Press the FMS Knob to remove the flashing cursor.
9)
Press the GO BACK Softkey to return to the map page.
EDITING USER WAYPOINTS
Editing a user waypoint comment or location:
1)
With the User Waypoint Information Page displayed, press the FMS Knob to activate the cursor.
2)
Move the cursor to the desired field.
3)
Turn the small FMS Knob to make any changes.
4)
Press the ENT Key to accept the changes.
5)
Press the FMS Knob to remove the flashing cursor.