9 trip planning, Trip planning, Flight management – Garmin G1000 King Air C90GT User Manual

Page 262

Advertising
background image

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT

190-00663-01 Rev. A

248

FLIGHT MANAGEMENT

SY

STEM

O

VER

VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID

ANCE

AFCS

ADDITIONAL FEA

TURES

APPENDICES

INDEX

5.9 TRIP PLANNING

The G1000 allows the pilot to view trip planning information, fuel information, and other information for

a specified flight plan or flight plan leg based on automatic data, or based on manually entered data. Weight
planning is also available, based on manually entered fuel data and the active flight plan (to estimate remaining
fuel).

TRIP PLANNING

All of the input of data needed for calculation and viewing of the statistics is done on the Trip Planning Page

located in the AUX Page Group.

Figure 5-97 Trip Planning Page

Trip Statistics

Desired Track -

Distance -

Est. Time Enroute -

Est. Time of Arrival -

Enroute Safe Altitude -

Sunrise Time (local) -

Sunset Time (local) -

Trip Input Data (sensor/pilot)

- Departure Time (local)

- Ground Speed

- Fuel Flow

- Fuel On Board Aircraft

- Calibrated Airspeed

- Indicated Altitude

- Barometric Pressure

- Total Air Temperature

Softkeys

- Automatic/Manual Page Mode

- Flight Plan/Waypoint Mode

Preview of Selected

Flight Plan/

Flight Plan Leg

Trip Planning Page Mode

- Automatic/Manual

Selected Flight Plan Segment

- FPL Number/Cumulative Legs (CUM or REM) or Leg Number (NN)

- Waypoints Defining Selected Flight Plan/Flight Plan Leg

Fuel Statistics

Efficiency -

Total Endurance -

Remaining Fuel -

Remaining Endurance -

Fuel Required -

Total Range -

Other Statistics

- Density Altitude

- True Airspeed (TAS)

The trip planning inputs are based on sensor inputs (automatic page mode) or on pilot inputs (manual page

mode). Some additional explanation of the sources for some of the inputs is as follows:

• Departure time (DEP TIME) - This defaults to the current time in automatic page mode. The computations

are from the aircraft present position, so the aircraft is always just departing.

Advertising
This manual is related to the following products: