Selecting the stormscope page, Hazard avoidance – Garmin G1000 King Air C90GT User Manual
Page 358
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
190-00663-01 Rev. A
344
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
Selecting a Stormscope range on the Navigation Map:
1)
Press the MENU Key.
2)
Select ‘MAP SETUP’.
3)
Select the ‘Weather’ group.
4)
Press the ENT Key.
5)
Turn the
large FMS
Knob to select ‘STRMSCP SMBL’.
6)
Turn the
small FMS
Knob to select the maximum display range.
7)
Press the
ENT
Key.
8)
Press the
FMS
Knob to return to the Navigation Map Page.
To change the display range on the Navigation Map Page, turn the RANGE Knob clockwise to zoom out or
counter-clockwise to zoom in.
SELECTING THE STORMSCOPE PAGE
Stormscope lightning data can be displayed at the ranges of 25 nm, 50 nm, 100 nm, and 200 nm.
Adjusting the Stormscope Map Range:
1)
Turn the large FMS Knob to select the Map Page Group.
2)
Turn the small FMS Knob to select the Stormscope Page.
3)
To change the map range, turn the RANGE Knob clockwise to zoom out or counter-clockwise to zoom in.
Figure 6-69 Stormscope Page