Hazard avoidance – Garmin G1000 King Air C90GT User Manual

Page 347

Advertising
background image

190-00663-01 Rev. A

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT

333

HAZARD AVOIDANCE

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

Figure 6-56 Vertical Scan Display

a

DjUsting

a

ntenna

t

ilt

a

ngle

In order to make an accurate interpretation of a storm cell, the radar beam should be pointed at the wet

part of the weather cell to record the proper rainfall intensity (color level). The ideal aiming point is just
below the freezing level of the storm. The best way to find this point is to use the Vertical Scan feature. The
antenna tilt angle can be centered on the strongest return area in the vertical scan to get a more accurate
view of the coverage and intensity of the target in the horizontal scan.

Adjusting antenna tilt on the Horizontal Scan display:

1)

Press the FMS Knob to activate the cursor in the TILT field.

2)

Turn the small FMS Knob to select the desired antenna tilt angle.

3)

Press the ENT Key.

4)

Press the FMS Knob to remove the cursor.

The RANGE Knob can also be used to adjust tilt up and down.

Adjusting antenna tilt on the Vertical Scan display:

1)

Select the TILT Softkey to activate the cursor in the TILT field and display the Tilt Line.

If the Tilt Line is not displayed, press the MENU Key and turn the large FMS Knob to select Show Tilt Line. Press
the ENT Key.

2)

Turn the small FMS Knob to adjust the antenna tilt angle. The selected tilt angle is implemented when Horizontal
Scan is again selected.

The RANGE Knob can also be used to adjust tilt.

Advertising
This manual is related to the following products: