8 display backlighting, System overview – Garmin G1000 King Air C90GT User Manual

Page 63

Advertising
background image

190-00663-01 Rev. A

Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT

49

SYSTEM OVERVIEW

SY

STEM

O

VER
VIEW

FLIGHT

INSTRUMENTS

EIS

AUDIO P

ANEL

& CNS

FLIGHT

MANA

GEMENT

HAZARD

AV

OID
ANCE

AFCS

ADDITIONAL

FEA
TURES

APPENDICES

INDEX

1.8 DISPLAY bACkLIGHTING

The PFD and MFD display backlighting, the PFD and MFD bezel, and the Audio Panel keys can be adjusted

manually in one of two ways:

• Using the individual dimmer bus control for the desired display, or

• Using the PFD Setup Menu and the following procedures. In normal operating mode, backlighting can only be

adjusted from the PFDs. In reversionary mode, adjustments can be made from any remaining displays.

Adjusting display backlighting:

1) Press either PFD MENU Key to display the PFD Setup Menu. ‘AUTO’ is now highlighted next to ‘PFD1 DSPL’. If

desired, turn the large FMS Knob to select ‘AUTO’ next to ‘MFD DSPL’ or ‘PFD2 DSPL’.

2) Turn the small FMS Knob to select ‘MANUAL’ and press the ENT Key. The intensity value is now highlighted.

3)

Use the FMS Knob to enter the desired backlighting then press the ENT Key.

4)

To remove the menu, press the CLR or MENU Key.

Adjusting key backlighting:

1) Press either PFD MENU Key to display the PFD Setup Menu. ‘AUTO’ is now highlighted next to ‘PFD1 DSPL’.
2) Turn the large FMS Knob to highlight ‘PFD DSPL’, ‘MFD DSPL’, or ‘PFD2 DSPL’, as desired.

3)

Turn the small FMS Knob in the direction of the green arrowhead to display ‘PFD1 KEY’, ‘MFD KEY’, or ‘PFD2

KEY’.

4) Turn the large FMS Knob to highlight ‘AUTO’.

5)

Turn the small FMS Knob to select ‘MANUAL’ and press the ENT Key. The intensity value is now highlighted.

6)

Use the FMS Knob to enter the desired backlighting and press the ENT Key.

7)

To remove the menu, press the CLR or MENU Key.

Figure 1-43 PFD Setup Menu

Advertising
This manual is related to the following products: