System overview – Garmin G1000 King Air C90GT User Manual
Page 51
190-00663-01 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
37
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
D
ate
/t
ime
The G1000 obtains the current Universal Coordinated Time (UTC) date and time directly from the GPS
satellite signals (shown on the AUX - GPS Status Page, Figure 1-22). System time (displayed in the lower
right corner of the PFD) can be displayed in three formats: local 12-hr, local 24-hr, or UTC. Local time is
set by adding/subtracting an offset (hours:minutes) to/from UTC. The time zone offset is not automatically
updated as the aircraft moves from one time zone to another.
Figure 1-33 System Time (Local 24-hr Format)
Configuring the system time:
1)
Select the AUX - System Setup Page.
2)
Press the FMS Knob to activate the cursor.
3)
Turn the large FMS Knob to highlight the ‘Time Format’ field.
4)
Turn the small FMS Knob to select the desired format and press the ENT Key to confirm selection. The ‘Time
Offset’ field is highlighted.
5)
Use the FMS Knob to enter the desired time offset (±HH:MM) and press the ENT Key to confirm selection.
Figure 1-34 Date/Time Settings (System Setup Page)