Garmin G1000 King Air C90GT - Manual (Page 545)

190-00663-01 Rev. A Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
531
APPENDIX A
Message Comments
MFD1 DB ERR – MFD1 Chartview
database error exists. The MFD and/or PFD detected a failure in the Chartview database (optional feature).
Ensure that the data card is properly inserted. Replace data card. If problem persists,
the G1000 system should be serviced.
MFD1 DB ERR – MFD1 FliteCharts
database error exists. The MFD and/or PFD detected a failure in the FliteCharts database (optional feature).
Ensure that the data card is properly inserted. Replace data card. If problem persists,
the G1000 system should be serviced.
DB MISMATCH – Aviation database
version mismatch. Xtalk is off. The PFD and MFD have different aviation database versions installed. Crossfill is off.
Install correct aviation database version in both displays.
DB MISMATCH – Aviation database
type mismatch. Xtalk is off. The PFD and MFD have different aviation database types installed (Americas,
European, etc.). Crossfill is off. Install correct aviation database type in both displays.
DB MISMATCH – Terrain database
version mismatch. The PFD and MFD have different terrain database versions installed. Crossfill is off.
Install correct terrain database version in both displays.
DB MISMATCH – Terrain database
type mismatch. The PFD and MFD have different terrain database types installed. Crossfill is off.
Install correct terrain database type in both displays.
DB MISMATCH – Obstacle database
version mismatch. The PFD and MFD have different obstacle database versions installed. Crossfill is off.
Install correct obstacle database version in both displays.
DB MISMATCH – Airport Terrain
database mismatch. The PFD and MFD have different airport terrrain databases installed. Crossfill is off.
Install correct airport terrain database in both displays.
GMA 1347D MESSAGE ADVISORIES
Message Comments
GMA1 FAIL – GMA1 is inoperative. The audio panel self-test has detected a failure. The audio panel is unavailable. The
G1000 system should be serviced.
GMA2 FAIL – GMA2 is inoperative.
GMA XTALK – GMA crosstalk error
has occurred.
An error has occurred in transferring data between the two GMAs. The G1000 system
should be serviced.
GMA1 CONFIG – GMA1 configuration
error. Config service req’d.
The audio panel configuration settings do not match backup configuration memory.
The G1000 system should be serviced.
GMA2 CONFIG – GMA2 configuration
error. Config service req’d.
MANIFEST – GMA1 software
mismatch. Communication halted.
The audio panel has incorrect software installed. The G1000 system should be serviced.
MANIFEST – GMA2 software
mismatch. Communication halted.
GMA1 SERVICE – GMA1 needs
service. Return unit for repair.
The audio panel self-test has detected a problem in the unit. Certain audio functions may
still be available, and the audio panel may still be usable. The G1000 system should be
serviced when possible.
GMA2 SERVICE – GMA2 needs
service. Return unit for repair.