Philips HR7638 - Manual (Page 6)

ENGLISH 6
Food processor: parts and accessories
A) Speed control
B) Motor unit
C) Built-in saftely lock
D) Bowl
E)
Screw cap (for closing the blender fixing hole
when the blender is not in use)
F) Tool holder
G) Blender jar
H) Peg of lid (activates and deactivates the
safety switch)
I) Lif of bowl
J) Feed tube
K) Pusher
L)
Lid of blender jar
M) Cover with closable insert storage space
N) Slicing insert medium
O) Slicing insert fime
P)
Shredding insert medium
Q) Insert holder
R) Blade (with protective cover)
S)
Kneading accessory
T) Emulsifying disc
U) Spatula
Introduction
This appliance has been equipped with an
automatic thermal cut-off system. This system will
automatically cut off the power supply to the
appliance in case of overheating.
If your appliance suddenly stops
running:
1 Pull the mains plug out of the wall socket.
2 Press the 'PULSE / 0' button to switch the
appliance off.
3 Let the appliance cool down for
60 minutes.
4 Put the mains plug in the wall socket.
5 Switch the appliance on again.
Please contact your Philips dealer or authorised
Philips service centre if the automatic thermal cut-
out system is activated too often.
CAUTION: In order to avoid a hazardous
situation, this appliance must never be connected
to a timer switch.
Important
◗ Read the instructions for use carefully and
look at the illustrations before using the
appliance.
◗ Keep these instructions for use for future
reference.
◗ Check if the voltage indicated on the
appliance corresponds to the local mains
voltage (110-127V or 220-240V) before you
connect the appliance.