AASTRA 600d for Aastra 800 and OpenCom 100 User Guide EN - Manual (Page 104)

The Device Menu
102
Audio
This menu is where you make the settings regarding volume, ringer and info
tones.
Menu description: page 109
System
This menu is where you can define the active communications system for your
mobile unit, manage subscriptions to various systems as well as view the
IPEI-number and information on hardware and software status.
Menu description: page 112
System menu
This entry is only available on the menu when your mobile unit is checked into
the Aastra 800 / OpenCom 100 communications system. Use this menu entry
to open the main menu of the Aastra 800 / OpenCom 100 communications
system and have access to the system features.
Menu description: page 113
Settings
This is where you find device settings such as keylock, key programming, user
name, display settings, illumination, Bluetooth, etc.
Menu description: page 129
Security
This menu can be accessed via the PIN (Personal Identification Number). The
default is “0000” (4 digits of 0 (zero)). You can lock the mobile unit here, change
the PIN, programme an emergency call number, enter alarm sensor settings
(Aastra 630d only) as well as reset the mobile unit entirely or partially to factory
settings.
Menu description: page 133
Profiles
This menu is for creating and managing user profiles. There are five editable
default profiles.
Menu description: page 135
Door opener
This menu entry is only available when your mobile unit is checked into the
Aastra 800 / OpenCom 100 communications system. This is for operating the
door opener.